Sale!

1 SureFly FAA Certified Electronic Ignition Magneto Replacement

(1 customer review)

$1,755.00$2,085.00

SureFly is an FAA-certified electronic (solid-state) magneto replacement. The SureFly Ignition Module (SIM) replaces one magneto – generally the left or impulse-coupled/starting magneto on our Grumman aircraft engines.

​Cutting your Magneto Maintenace Saves Big Bucks

Replacing one Slick magneto eliminates that magneto maintenance and cuts associated costs in half! NO 500-hour inspections on a Surefly. Rebuilding your slick Inpulse Coupled Mag currently costs $850.00 plus postage, and A/P time to remove, reinstall and time the mag.  Think about how many times you are currently servicing old-style Slick Magnetos and the COST. 

With SureFly you get zero maintenance, zero rebuilds & zero overhauls and will pay for itself versus the cost of maintaining your Slick 4371.

SureFly Saves Money at the Gas Pump

Grumman aircraft can enable SureFly’s advanced timing feature for improved cruise flight efficiency at higher altitudes. This translates to FUEL savings.  Owners report a gallon per hour savings.  We would love your PIREP.

Easier Starting:

SureFly perfectly controls the timing to be at TDC below 400 rpm which combined with longer spark dwell and the option to use wider gapped spark plugs, makes starting on the second blade and hot starts faster.
This greatly decreases wear and tear on high-performance starters and Grumman electrical systems.

A Long History with our Grummans.

SureFly Ignition Modules are hand-built in Granbury, Texas almost entirely from components manufactured in Texas and Michigan. Designed, engineered, created, certified in a Grumman, and supported by the same team that brought you Sky-Tec starters and Plane-Power alternators, our approach to SureFly shares the same commitment, experience, and passion for creating and bringing sensible, affordable solutions to the piston engine aviation market.

Bottom Line – This is a replacement you will enjoy every time you close your canopy and push the starter button.

  Ask a Question

 

If any of the following items apply to your installation, please call Grumman Parts at 540-309-6427 or SureFly at 817-373-5161 before proceeding with the purchase or installation of a SureFly Ignition Module:

1) Your aircraft tachometer is one of the following:

□ Horizon, - Requires TACH2 Tachometer Signal Converter

  • □  Electronics International, (changing the inline resistor value)
  • □  EFIS or Engine Monitor that requires magneto P lead inputs,
  • □  EFIS or Engine Monitor that requires a 0-5 volt square wave input,

2) Your aircraft has more than one engine,

  1. 3)  Your aircraft has an existing electronic ignition,
  2. 4)  Your aircraft has one of the following STC’s:
  • □  Western Skyways Turbo STC,
  • □  Spin-on oil filter adapter,
  • □  Auto Fuel STC.

SureFly strongly recommends that you replace the ignition harness with a new “Slick” style harness. A large number of existing ignition harnesses have been discovered to be deficient even after passing a high-tension lead test. SureFly will not warrant a SIM for a rough running engine unless the harness and spark plugs have been replaced.

Surefly Installation Documentation:

STC
AML
STC Permission Letter
SF1005: ICA
Link to FAA Advisory Circular 43.13-1b Acceptable Methods, Techniques, and Practices

Sample FAA form 337

SIM4P specific docs:

SF1001: Installation Instructions
SIM4P: Overview Drawing
SIM4P-HW: Hardware Kit

SIM4N specific docs:

SF1002: Installation Instructions
SIM4N: Overview Drawing
SIM4N-HW: Hardware Kit

SIM6C specific docs:

SF1003: Installation Instructions
SIM6C:  Overview Drawing
SIM6C-HW: Hardware Kit

SIM6L specific docs:

SF1004: Installation Instructions
SIM6L: Overview Drawing
SIM6L-HW: Hardware Kit

Ready to ship in 1-3 business days


Additional information

Weight N/A
SIM Type

4-Cylinder Non-Impulse Mag Replacement, 4-Cylinder Impulse Coupled Mag Replacement, SIM6L -Lycoming 6 Cylinder, SIM6C – Continental 6 Cylinder

1 review for 1 SureFly FAA Certified Electronic Ignition Magneto Replacement

5.0
Based on 1 review
5 star
100
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. Les Staples AP/IA (Verified Purchase)

    From: Les Staples
    Subject: SureFly Electronic Ignition
    Date: September 1, 2021 at 6:41:01 PM EDT
    To: grumman-gang@grumman.net
    Cc: Jason Hutchinson , Richard Condy

    Gang,

    I am Les Staples. I am an A&P IA, have owned an AA5A since 1994, was a
    partner in an AA5B from 1990 until I bought the Cheetah and flew AA5s
    prior to that (back to 1973). I am currently VP of GOPA (formerly AYA).
    Until a few years ago, I was the president and chief development officer
    of Sky-Tec starters and a partner in Plane-Power alternators and
    regulators. I am currently a limited partner in SureFly Partners, Ltd.
    and was involved from the first in the electronic ignition development
    and certification. So much for who I am. A lot of you know me.

    I have been made aware of some non-factual information about the SureFly
    Ignition Modules (SIMs) that is being passed around by some participants
    on this forum. I want to set the record straight, addressing all of the
    BS I am receiving.

    Here it is, I’m opening the kimono.

    First, the SureFly electronic ignition modules (SIMs) were completely
    designed and developedby the partners of SureFly Partners, Ltd., most of
    which were previously employees of Sky-Tec or Plane-Power.

    SureFly Partners, Ltd. presented early models to Lycoming who partnered
    with us to finalize the feature set they desired. Lycoming was kind
    enough to provide on-engine test cell data to aid us in development and
    certification.

    What was to become the initial production 4 cylinder and 6 cylinder SIMs
    was presented along with design data and laboratory test data to the
    Chicago FAA Aircraft Certification Office (ACO) and, after a couple of
    years of additional ground and flight test demonstrations, the ACO
    granted SureFly two STCs, one for engine and one for airframe.

    SureFly built, and continues to build, specially configured SIMs for
    Lycoming. They are black. SureFly branded units are blue. Lycoming
    presented the SureFly approved data to the New York ACO and was granted
    permission to add these SIMs as approved ignition modules on Lycoming
    engines per a Service Instruction (It’s nice to be the TC holder).

    As part of certification, SureFly put the SIMs through rigorous DO-160
    testing by independent laboratories for voltage, temperature, humidity,
    shock, vibration, radiated and conducted emissions, lightning immunity
    and everything else the ACO could think of.

    As with any new product, issues have arisen and SureFly has worked to
    fix them. That isn’t quick with an FAA-certified product. Every change has
    to be approved by the ACO!

    So, here are the issues that we have seen:

    1. Hesitation or backfire during mag check.

    a. Cause – The SIM takes time to start up after the P-lead is ungrounded
    and some key switches actually ground out both ignitions during the
    transition.

    First Fix – Reduce the speed at which the key is moved. This eliminates
    90% of the problems.

    Second Fix – Rev D of the SIM4 (current production) reduces the startup
    time. This seems to pretty much eliminate the problem but hesitation &
    backfire is stilla possibility.

    2. Missing (rough running) on some 24V aircraft (a small minority but
    a real problem).

    a. Cause 1 (yep, more than one problem!) – Spikes over 35.7V on input power.

    First Fix – PC17 power conditioner was FAA approved as an installation
    aid to insert between aircraft electrical system and SIM power
    input. This totally fixed the problem

    Second Fix – Rev D SIM allows for higher input voltage and fixed this
    problem.

    b. Cause 2 (now we find this one!) – With high input voltage (>24V), a
    very efficient coil in the SIM and narrow plug gap, a spark can be
    developed during the coil charging rather than only at coil discharge.
    This is the wrong time to fire!

    First Fix – Gap the plugs to > .022 seems to fix this problem in most cases.

    Second Fix – Install a PC17 power conditioner between the aircraft
    battery and SIM power input. This totally fixes the problem. Rev D SIM did
    not address this problem.

    3. Missing (rough running) on both 12V and 24V aircraft with ACS
    blue harnesses.

    a. Cause – the harness breaks down with high plug voltage.

    Fix – Replace any ACS blue harnesses with something else (Champion,
    Kelly, Maggie, etc.)

    4. Rough running and high cylinder temperatures.

    a. Cause – Timing on installation.

    Fix – Time the SIM at 0 degrees BTDC. READ THE INSTALLATION INSTRUCTIONS!

    Now, if I missed any other problems you know of or have heard of, LET ME
    KNOW. I’ll tell you what I know and only what I know. I’ll try to help.

    Les Staples A&P IA

    AA5A N9849U

Add a review

Shipping Policy

Grumman Parts Shipping Policy

All orders are shipped within 48 hours Monday - Friday 8am - 5pm.

Carriers

We use the following carriers to deliver our orders:

USPS
UPS
FedEx
DHL

Order Tracking

If a tracking # is provided by the shipping carrier, we will update your order with the tracking information. Please note that some orders using 1st Class USPS mail will not have tracking numbers.

Shipping Rates

The rate charged for the shipping of your order is based on the size and weight of your products, and your location. Before the final checkout page, you will be shown what the cost of shipping will be, and you will have a chance to not place your order if you decide not to.

Back Orders

If an item goes on back order we will ship you the part of your order that is in stock. When the item becomes available we will ship you the rest of your order. You will not be charged any additional shipping and handling for the second shipment.

Refund Policy

Privacy Policy
This policy covers how we use your personal information. We take your privacy SERIOUSLY and will take all measures to protect your personal information.

What Information Do We Collect?

We only collect information that we need that is related to your order. This includes your:
Billing Address
Shipping Address
Email Address
Credit Card Information is handled through Stripe or Paypal secure external gateways at checkout.

In addition, we also collect information on your IP address, browser type, and Refer URL data. We use this data to prevent hacking attempts, help us know what web browsers people are using, and find out where our visitors are coming from so that we can improve our marketing.

How Is My Information Used?

Your information is only used to fill your order. We do not sell or redistribute your information to ANYONE.

Security and Storage

Only your order data billing, shipping, and order contents data is stored on our server. This information is encrypted using a Secure Sockets Layer before it is transmitted over a web server. We do not store your Credit Card data.

Cookies and Browser Information

Cookies are small files that reside on your computer and allow us to recognize you on your next visit or store your shopping cart contents. We use them only to track this information.