If you’ve ever removed and installed front seats on Grumman AA-
The round head slotted screws that fasten the seats to the seat brackets on the spar are very difficult to remove with a screwdriver. Blade screwdrivers just don’t make it here because the blade slips off the screw due to the tight working quarters and angle of attack of the screwdriver.
To make matters worse, many early Grummans don’t have access holes in the seat buckets, necessitating working upside down under the seat –
The Fresh Aero Easy Seat Tool was developed to eliminate the above difficulties and make Grumman front seat removal and installation considerably easier.
The Easy Seat Tool is offered for seats with access holes in the seat buckets. If you have an earlier model Grumman without the seat access holes, we recommend arraigning to have this drilling procedure done as it makes removing the seats so much easier. The holes simplify removing and re-
The Easy Seat Tool consists of a 2 inch deep well socket and embedded blade assembly that captures the head of the existing round head seat screws and remains on the screw as it is removed and re-
The Easy Seat socket is used with a ¼ inch drive ratchet wrench (available from any hardware store or from Fresh Aero as an optional item).
Your seats can be removed and replaced in a fraction of the time. And you’ll have easy access to “under the panel” maintenance like filling your brake reservoirs and servicing your vacuum system filter too.
Once you’ve used the Grumman Easy Seat tool, you’ll never look at front seat removal and installation the same way again.